ORP10-Oxidation Reduction Potential (ORP) Transmitter, RS485, Modbus

Time:2019/02/17 View:5266 Category:Measurements Category:ORP Category:Products

请联系我们咨询

Oxidation Reduction Potential (ORP) is a measurement of sanitizer effectiveness in water. ORP is an electronic measurement in millivolts (mV) of the ability of a chemical substance to oxidize or reduce another chemical substance. The output signal can be RS485, Analog Voltage or Analog Current. The sensor is applicable for industrial, water processing, sewerage system, irrigation, smart agriculture etc.

Resources
User Manual	UM-ORP10 Oxidation Reduction Potential Transmitter
Software	SensorOneSet-EN

■ ORP measurement

■ Output Interface with RS485, Voltage, Current

■ High accuracy with excellent stability

■ Reverse power protection and Built-in TVS/ESD protection

Specifications
Output Interface	Analog Voltage 0-2V (Output resistance ~0ohm)	Analog Current 4-20mA (Load Resistor<500ohm)	RS485 Modbus-RTU
Power Supply	3.9-30V/DC	12-30V/DC	3.9-30V/DC
Power Consumption	10mA@24V DC	30mA@24V DC (with 20mA output signal)	10mA@24V DC
ORP Measurement	Range:+/-2000mV,Resolution:1mV,Accuracy:±2%
IP Ratings	Electrode:IP68 Transmitter:IP65
Operating Temperature	-40~85℃
Installation	Electrode:3/4″NPT screw threads Transmitter:Mounting hole
Cable Length	Power and Signal Cable:2 meters or Customize Electrode Cable:5 meters
Dimension	Electrode:3/4″NPT screw threads Transmitter:1287042mm

Parameters

Code

Comments

Code 1:

Product Series

ORP10

ORP10 transmitter

Code 2:

Power Supply

3.9-30V DC

3.3-16V

Code 3:

ORP Range

+/-2000mV

+/-1000mV

Customize

Code 4:

Output Interface

Analog Voltage 0-2V

Analog Current 4-20mA

RS485,Modbus-RTU

RS485,Modbus-RTU & Analog Voltage 0-2V

RS485,Modbus-RTU & Analog Current 4-20mA

SDI-12

Customize

Code 5:

Cable Length

002

XXX

Electrode Cable:5 meters , Power and Signal Cable:2 meters

Electrode Cable:5 meters , Power and Signal Cable:xxx meters

Ordering Code Example:

ORP10 transmitter Power Supply 3.9-30V DC, ORP Range +/-2000mV, Output Interface RS485, Modbus-RTU, Power and Signal Cable Length 5 meters. Ordering Code is : ORP10 – A A C 005

TagsAnalog output PH measurement PH/ORP Transmitter RS485 Modbus

PREV: PH10-Non-Isolated PH Transmitter, RS485, Modbus

NEXT: Takeme10-Handheld Meter Soil Moisture & Temperature

Recommendations