EC05V Soil moisture sensor, METER/Decagon EC-5 compatible
View:439 Category:Products Category:Soil Moisture Category:Soil Science
EC05V measures substrate moisture content. It sealed with resin packaged plastic body with sensing rods which can be insert directly into the substrate with long time stability. Sensor with relatively small size and can be used for pot culture and seedling tray. The sensor is applicable for science research, irrigation, greenhouse, smart agriculture etc.
Resources | |
User Manual | EC05V Moisture Sensor User Manual |
Sensor Comparison | |
Product Code | Comments |
EC05V | Soil Moisture Sensor (Compatible with METER / Decagon EC-5) |
Resources | |
User Manual | EC05V Moisture Sensor User Manual |
EC05V measures substrate moisture content. It sealed with resin packaged plastic body with sensing rods which can be insert directly into the substrate with long time stability. Sensor with relatively small size and can be used for pot culture and seedling tray. The sensor is applicable for science research, irrigation, greenhouse, smart agriculture etc.
Features:
■ Moisture measurement with high sensitivity and accuracy
■ Relatively small size for pot culture and seedling tray
■ Power supply (excitation voltage) ranges from 2.5-15.0V DC
■ Reverse power protection and built-in TVS/ESD protection
■ Output Interface with Voltage
■ Calibration formula for different growing media
■ Low salinity sensitivity
■ Minimal soil disturbance
■ Water proof to IP68 ratings and can be directly buried into soil
Specification | |
Measuring parameters | Substrate Moisture (Volumetric Water Content) |
Power Supply (excitation voltage) | 2.5-15V DC, Max. 15mA |
Output Voltage | Analog voltage, Output impedance: <1Kohm
■ When excitation voltage <= 5500mV: 10%–50% of excitation voltage (e.g. 250-1250 mV at 2500 mV excitation) ■ When excitation voltage > 5500mV: 10%–50% of 5500mV |
Soil Moisture Range | Range:0-100%
Resolution: 0.001 m?/m? VWC in mineral soils, 0.25% in growing media Accuracy (Generic calibration): ±0.03 m3/m3 typical in mineral soils that have solution EC <8 dS/m Accuracy (Medium-specific calibration): ±0.02 m3/m3 in any porous medium (± 2%) |
Measurement Duration | <10 ms |
Data Logger Compatibility | METER ZL6, EM60, and Em50 data loggers or any data acquisition systems capable of 2.5-3.6 VDC excitation and single-ended voltage measurement at equal to or greater than 12-bit resolution. |
IP Ratings | IP68 |
Operating Temperature | -40~85°C |
Sensor Sealed | Epoxy resin |
Installation | Surface or buried installation |
Cable Length | 5 meters, or Customize |
Dimension | 20*11*91mm |
Ordering Information | |||
Parameters | Code | Comments | |
Code 1:
Product Series |
EC05V | Substrate Moisture measurement, 2.5-15V DC Power supply, Analog voltage output. | |
Code 2:
Connector |
A
B C |
3.5mm phone jack
Cold pressed terminal Pre-tinning wire |
|
Code 3:
Cable Length |
005
XXX |
5 meters
Customize, XXX is required cable length(Unit: meter) |
|
Ordering Code Example:
EC05V Substrate Moisture measurement, 2.5-15V DC Power supply, Analog voltage output, Cold pressed terminal, Cable Length 5 meters. Ordering Code is : EC05V-B 005 |
Dimension:
Output Interface:
- MS20-Soil Moisture and Temperature Sensor,...
- MT10A-Soil Moisture, EC and Temperature Se...
- MS10-Soil Moisture and Temperature Sensor,...
- MT10B-Soil Moisture, Temperature Sensor, S...
- [Resource] MS20 Soil Moisture, Temperature...
- MEC10-Soil Moisture, EC and Temperature Se...
- [Resource] MT20A/MT20B Soil Moisture, EC a...
- [Resource] MEC20 Soil Moisture, EC, Temper...