LWS10-Leaf Wetness Sensor, RS485, Modbus

Time:2019/02/16 View:5909 Category:Leaf Wetness Category:Measurements Category:Products

请联系我们咨询

LWS10 measures leaf wetness. It sealed with resin packaged plastic body can be used for long time monitor. Wetness measurement value is proportional to the percentage of sensing area covered with water. The output signal can be RS485, Analog Voltage or Analog Current. The sensor is applicable for science research, bacteria prevention, foliage dressing spraying, greenhouse, smart agriculture etc.

Resources
User Manual	UM-LWS10 Leaf Wetness Sensor
Software	SensorOneSet-EN

■ Integrated with leaf wetness and temperature measurement

■ Output Interface with RS485, Voltage, Current

■ Mimics the real leaf thermal resistance by sensing shape and thickness

■ Water, ice, foggy detection

■ Water proof to IP68 ratings

■ High accuracy with excellent stability

■ Reverse power protection and Built-in TVS/ESD protection

Specifications
Output Interface	Analog Voltage 0-2V (Output resistance ~0ohm)	Analog Current 4-20mA (Load Resistor<500ohm)	RS485 Modbus-RTU
Power Supply	3.6-30V/DC	12-30V/DC	3.6-30V/DC
Power Consumption	6mA@24V DC	30mA@24V DC (with 20mA output signal)	6mA@24V DC
Leaf wetness Measurement	Range: 0-100%, Resolution: 0.1%, Accuracy:5%
Temperature Compensation	Range: -40~80℃, Resolution:0.1℃, Accuracy:±0.5℃
Measurement Technique	FDR
IP Ratings	IP68
Operating Temperature	-40~85℃
Sensor Sealed	Epoxy resin
Installation	Mounting kit
Cable Length	2 meters or Customize
Dimension	6513145mm

Parameters

Code

Comments

Code 1:

Product Series

LWS10

LWS10 leaf wetness and temperature Sensor

Code 2:

Output Interface

Analog Voltage 0-2V

Analog Current 4-20mA

RS485,Modbus-RTU

RS485,Modbus-RTU & Analog Voltage 0-2V

RS485,Modbus-RTU & Analog Current 4-20mA

SDI-12 (not available for now)

Customize

Code 3:

Power Supply

3.6-30V DC (not applicable for 4-20mA output)

12-30V DC

2.7-16V DC (not available for now)

Customize

2.0-5.5V DC (not available for now)

Code 4:

Cable Length

002

XXX

2 meters

Customize, XXX is required cable length(Unit: meter)

Ordering Code Example:

Leaf wetness and temperature sensor, Output Interface RS485 Modbus RTU, Power Supply 3.6-30V DC, Cable Length 5 meters. Ordering Code is : LWS10 – C A 005